ATEN CS-1754 CS-1758 User Manual
Page 43
w
F7 SCAN:
The SCAN function allows you to automatically switch among the
available computers at regular intervals so that you can monitor their
activity without having to take the trouble of switching manually.
w
The selection of computers to be included for Auto Scanning is
made with the Scan Mode setting under the F3 SET function (see
p. 33).
w
The amount of time that each Port displays for is set with the Scan
Duration setting under the F3 SET function (see p. 33). When you
want to stop at a particular location, press the [Spacebar] to stop
scanning.
w
If the scanning stops on an empty port, or one where the computer
is attached but is powered Off, the monitor screen will be blank,
and the mouse and keyboard will have no effect. Simply wait - after
the Scan Duration time is up, the Scan function will move on to the
next port.
w
As each computer is accessed, an S appears in front of the Port ID
display to indicate that it is being accessed under Auto Scan Mode.
w
If you want to temporarily keep the focus on a particular computer,
you can pause the scanning either by pressing P, or with a Left
Click of the mouse. See Auto Scan Mode, p. 21, for details.
w
When you want to permanently stop scanning at a particular
location, press the [Spacebar] to stop scanning and exit Auto
Scan Mode.
Note: While Auto Scan Mode is in effect, the console will not
function. You must exit Auto Scan Mode in order to regain
control of the console.
w
To exit Auto Scan Mode, press the [Spacebar] or [Esc].
2003-11-14
CS-1754 / CS-1758 User Manual
37