ATEN CS-1754 CS-1758 - Manual (Page 53)

w CS-1754:
MVs Computers MVs Computers MVs Computers MVs Computers
1 1 - 4 7 19 - 22 13 37 - 40 19 55 - 58
2 4 - 7 8 22 - 25 14 40 - 43 20 58 - 61
3 7 - 10 9 25 - 28 15 43 - 46 21 61 - 64
4 10 - 13 10 28 - 31 16 46 - 49
5 13 - 16 11 31 - 34 17 49 - 52
6 16 - 19 12 34 - 37 18 52 - 55
Troubleshooting
Symptom Possible Cause Action
Erratic
behavior. Unit not receiving
enough power. Use a DC 5V power adapter if you are not
already using one. If you are already using a
power adapter, check that it matches the
system specifications (DC 5V), and that it is
plugged in and functioning properly.
Keyboard
and/or Mouse
not responding. Keyboard and/or
mouse need to be
reset. Press and hold port selection switches 1 and 2
for two seconds.
Unplug the cable(s) from the console port(s),
then plug it/them back in.
No connection to
the computer. Check the cable from the switch to the computer
to make sure it is properly connected.
KVM switch needs to
be reset. Power off all devices on the installation (see the
note at the top of p. 8); power off the KVM
switch; wait five seconds; then power up.
2003-11-14
CS-1754 / CS-1758 User Manual 47