ATEN CS-1754 CS-1758 - Manual (Page 36)

OSD Functions
OSD functions are used to configure and control the OSD. For example,
you can: rapidly switch to any port; scan selected ports only; limit the list
you wish to view; designate a port as a Quick View Port; create or edit a
port name; or make OSD setting adjustments.
To access an OSD function:
1. Either Click a Function Key field at the top of the Main Screen, or
press a Function Key on the keyboard.
2. In the Submenus that appear make your choice either by Double
Clicking it, or moving the Highlight Bar to it, then pressing [Enter].
3. Press [Esc] to return to the previous menu level.
w F1 GOTO:
GOTO allows you to switch directly to a port either by keying in the
port’s Name, or its Port ID.
w To use the Name method, key in 1; key in the port’s Name; then
press [Enter].
w To use the Port ID method, key in 2; key in the Port ID; then press
[Enter].
Note: You can key in a partial Name or Port ID. In that case, the
screen will show all the computers that the User has View
rights to (see Set Accessible Ports, p. 36), that match the
Name or Port ID pattern, regardless of the current List settings
(see p. 31).
To return to the OSD Main Menu without making a choice, press
[Esc].
2003-11-14
30 CS-1754 / CS-1758 User Manual