ATEN CS-1754 CS-1758 - Manual (Page 38)

w F3 SET:
This function allows the Administrator and each User to set up their
own working environment. A separate profile for each is stored by the
OSD and is activated according to the Username that was provided
during Login.
To change a setting:
1. Double Click it; or move the highlight bar to it, then press [Enter].
2. After you select an item, a submenu with further choices appears.
To make a selection, either Double Click it; or move the Highlight
Bar to it, then press [Enter]. An icon appears before the selected
choice to indicate which one it is. The settings are explained in the
following table:
Setting Function
OSD HOTKEY Selects which Hotkey activates the OSD function: [Scroll Lock]
[Scroll Lock] or [Ctrl] [Ctrl]. Since the Ctrl key combination may
conflict with programs running on the computers, the default is
the Scroll Lock combination.
PORT ID
DISPLAY
POSITION Allows you to position where the Port ID appears on the screen.
The default is the upper right corner, but you can choose to have
it appear anywhere on the screen.
Use the Arrow Keys plus Pg Up, Pg Dn, Home, End, and 5 (on
the numeric keypad with Num Lock off), to position the Port ID
display, then press [Enter] to lock the position and return to the
Set submenu.
Note: The ID display position for each port on the installation is
set independently; the choice specified here only applies to the
currently active computer.
PORT ID
DISPLAY
DURATION Determines how long a Port ID displays on the monitor after a
port change has taken place. The choices are: User Defined -
which lets you select the amount of time (from 1 - 255 sec.); and
Always On - which displays the Port ID at all times. If you select
User Defined, key in the number of seconds, then press [Enter].
The default is 3 Seconds.
(Table continues on next page)
2003-11-14
32 CS-1754 / CS-1758 User Manual