ATEN CS-1754 CS-1758 - Manual (Page 41)

(F4 ADM: continued)
Setting Function
EDIT PORT
NAMES To help remember which computer is attached to a particular
port, every port can be given a name. This function allows the
Administrator to create, modify, or delete port names.
Note: Only the Ports currently chosen for the LIST view on the
main OSD screen (see p. 31), show up here.
To Edit a port name:
1. Use the Navigation Keys to move the highlight bar to it, then
press [Enter].
2. Key in the new Port Name, or modify/delete the old one. The
maximum number of characters allowed for the Port Name is
12. Legal characters include:
w All alpha characters: a - z; A - Z
w All numeric characters: 0 - 9
w + - / : . and Space
Case does not matter; OSD displays the Port Name in all
capitals no matter how they were keyed in.
3. When you have finished editing, press [Enter] to have the
change take effect. To abort the change, press [Esc].
RESTORE
DEFAULT
VALUES This function is used to undo all changes - except for the Port
Names, Usernames / Passwords, and QUICK VIEW port settings
- and return the setup to the original factory default settings.
CLEAR THE
NAME LIST This function is similar to Restore Default Values. The difference
is that it also clears the Port Names and QUICK VIEW settings
along with undoing all changes and returning the setup to the
original factory default settings.
ACTIVATE
BEEPER Choices are Y (for On), or N (for Off). When activated, the
beeper sounds whenever a Port is changed; when activating the
Auto Scan function (see p. 37); or an invalid entry is made on an
OSD menu. The default is Y.
(Table continues on next page)
2003-11-14
CS-1754 / CS-1758 User Manual 35