Turbo Action 70600 CHEETAH E-SHIFT Controller - Manual (Page 12)

12
Turn Function Switch knob clockwise until the right
LED display position reads 6. This position sets the
BurnOut First Shift RPM to within 100 RPM Fig #8.
Factory Default = 4000 RPM (Fig. #8)
Program Position #6:
Do the same as Position #1.
Turn Function Switch knob clockwise until the right
LED display position reads 7. This position sets the
BurnOut Second Shift RPM to within 100 RPM
Fig. #9.
Factory Default = 5000 RPM (Fig. #9)
Program Position #7:
Do the same as Position #1.
Turn Function Switch knob clockwise until the right
LED display position reads 8. This position sets the
BurnOut Third Shift RPM to within 100 RPM Fig. #10.
Factory Default = 5000 RPM (Fig. #10)
Program Position #8:
Do the same as Position #1.
Turn Function Switch knob clockwise until the right
LED display position reads 9. This position sets the
BurnOut Fourth Shift RPM to within 100 RPM
Fig. #11.
Factory Default = 5000 RPM (Fig. #11)
Program Position #9:
Do the same as Position #1.
4 0 0 6
10K 1K 100 POS. POS.
Fig. #8
4000 RPM
5 0 0 7
10K 1K 100 POS. POS.
Fig. #9
5000 RPM
5 0 0 8
10K 1K 100 POS. POS.
Fig. #10
5000 RPM
5 0 0 9
10K 1K 100 POS. POS.
Fig. #11
5000 RPM
POSITION #6: BurnOut First (1-2) Shift RPM
POSITION #8: BurnOut Third (3-4) Shift RPM
POSITION #9: BurnOut Fourth (4-5) Shift RPM
POSITION #7: BurnOut Second (2-3) Shift RPM