Turbo Action 70600 CHEETAH E-SHIFT Controller User Manual
Page 9
Advertising
9
Before Shift
12-16V
Ground
12-16V
1.
When there is not output out of the Controller, #30 will
feed directly to 87@ keeping the Dedenbear/Biondo type
electric shifter powered.
2.
If the shift point is reached and 12-16V is sent to pin #85
the output of pin #30 will no longer go out to #87@ to
power the electric shifter solenoid, but instead will be
waiting at pin #87, which is not being used. This will cause
the spring to push the ram and shift the shifter.
Figure #5
Power Relay #5000-1
Green
87
White
86
Red
85
Black
30
Blue
87@
Ground
1/99,3/99,6/99,8/99,
10/05
12-16V Output #1
5
3
2
4
Output #4
Output #3
Output #2
Input
12-16V
1
Advertising