Turbo Action 70600 CHEETAH E-SHIFT Controller - Manual (Page 14)

14
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
12345678901234567890123456789012123456789012345678901234567890121234567
Turn Function Switch knob clockwise until the right
LED display position digits read 14. The Time Select
position (10K position on the display) is capable of
setting the following time functions:
1 = Sets the time between when you leave the
starting line and the first shift. Must use the
Hold function (tranzbrake or clutch pedal to
activate this timer).
(0.1 - 0.9 second) .
2 = Sets time between the 2-3 shift. (0.1 - 0.9 sec.).
3 = Sets time between the 3-4 shift. (0.1 - 0.9 sec.).
4 = Sets time between the 4-5 shift. (0.1 - 0.9 sec. ).
5 = Sets time that the relays in the controller hold,
when activated in the Pulsing mode. See
Position #15 for explanation of Holding or
Pulsing Relays. This allows you to adjust the
length of time your shift light or air shifter stays
on, or pulses
(0.1 - 0.9 sec.) .
Setting these times will prevent early upshifts or
double shifts. Each of the five times can be set
NOTE
from 0.1- 0.9 of a second in duration.
Factory Default = 0.5 sec (Fig. #16)
We suggest not changing these settings till you
try in vehicle.
Program Position #14:
The 10K LED to the far left will read 1-5. The number
represents one of five Time Select Functions listed
above. The 1K LED position represents the Time Set
in 0.1 second increments.
To Set TIme Select Function Position:
Push 1000’s Button to advance from 1-5.
To Set Time Set For Each Time Select Function:
Push 100’s Button to advance from 0.1 - 0.9 second.
Repeat steps above for each time function you wish to
change.
3/31/04
POSITION #14: Shift Time Adjustment
Fig. #16
10K 1K 100 POS. POS.
1.
2.
3.
4.
5
5
5
5 1
1
1
1
4
4
4
4
5. 5 1 4
Vehicles using Air/C02/
Electric Shifters-suggest
setting #5 Relay to 0.2 -
Leave the other relays at 0.5