Tuff Country 56900 - Toyota Tacoma 05-14 6 lift kit - Manual (Page 8)

22. Working on the front cross member, remove the (2) long
bolts that hold the front differential brackets to the front cross
member. Discard hardware.
23. Working on the passenger side of the front differential,
remove the plastic clip that attaches the 4WD wire harness
to the metal bracket. Take special care to not break the
plastic clip when removing it, it will need to be re-
installed.
24. Working on the front differential housing, locate the
breather tube bracket that is mounted on top of the housing
and remove the bolt that secures it to the differential. Save
hardware.
25. Working on the driver side of the front differential, remove
the (3) bolts that hold the differential bracket to the differen-
tial. Save the stock hardware.
26. Working on the passenger side, remove the (2) bolts that
hold the differential bracket to the differential. Save the stock
hardware.
27. Locate the new driver side differential bracket. Locate (2)
PB2408 poly bushing and (1) S10058 sleeve from hardware
bag 56900NB1. Install the new poly bushings into the differ-
ential bracket, next install the sleeve into the poly bushings.
Special note: Make sure to use a lithium or moly base
grease prior to inserting the new bushings into the
bracket and on the sleeve prior to installing it into the
bushings. This will increase the life of the bushings as
well as prevent squeaking.
28. Locate the new passenger side differential bracket.
Locate (4) PB2408 poly bushings and (2) S10058 sleeves
from hardware bag 56900NB1. Install the new poly bushings
and sleeves into the differential bracket. Special note: Make
sure to use a lithium or moly base grease prior to insert-
ing the new bushings into the bracket and on the
sleeves prior to installing them into the bushings. This
will increase the life of the bushings as well as prevent
squeaking.