ARI Armaturen ARI-PREMIO User Manual
Page 18
Advertising
Page 18
0040501000 4511
Operating and installation instructions
Thrust actuator ARI-PREMIO
Fig. F:
- Screw the coupling (pos. 50.27) firmly into the torsion safety feature
(pos. 50.32) and secure in place using grub screw M6 (pos. 50.35).
- Run valve to lowest position.
- Clip lift dial (pos. 50.23) onto yoke in such a way that top edge of torsion safety
feature is in alignment with tip of arrow mark on lift dial.
- Run valve to both final positions and check to ensure that these are safely
reached
- Carry out electrical connection (see point 5.4).
- Set travel switch S3 (see point 5.5.3.2).
Advertising