ARI Armaturen ARI-PREMIO - Manual (Page 28)

Page 28 0040501000 4511
Operating and installation instructions
Thrust actuator ARI-PREMIO
- Carefully place hood onto gearbox and mount firmly on thrust actuator with collar nut /
rubber gasket and countersunk screw.
Fig. 12 Switchgear and indicating feature ARI-PREMIO 2.2 - 5 kN
Pos. Designation Pos. Designation
50.38 Guide spindle 50.52 Setting spindle for switch S4
50.42 Board support 50.53 Setting spindle for switch S5
50.43.3 Jack strip for mains connection 50.54 Trip cam
50.43.4 Jack strip for motor connection 50.56 Spring
50.44 Self-tapping screw 50.57 Head cap screws DIN EN ISO 4762 -
M4x10
50.50 Trip slide (option) 50.61 Stroke-switch board
50.51 Setting spindle for switch S3 50.62 Connector, 6-pole
(option: travel switch)