Avocent Access Router Cyclades-PR2000 User Manual
Page 80
Cyclades-PR2000
Chapter 9 - Routing Protocols
80
CONFIG=>IP=>BGP4=>NEIGHBOR=>ADD (continued)
Keepalive
Interval between keepalive messages sent to this neighbor.
Connection Retry
Time
When a connection with this neighbor is broken, the router try to reconnect with
frequency 1 divided by the Connection Retry Time.
Start Time
Time delay before router tries to connect
Incoming Distribution
Access List Name
Applies a distribution access list to update messages received from this neighbor.
Outgoing Distribute
Access List Name
Applies a distribution access list to update messages sent to this neighbor.
Incoming Filter
Access List Name
Applies a filter access list to update messages received from this neighbor.
Outgoing Filter
Access List Name
Applies a filter access list to update messages sent to this neighbor.
Incoming Community
Access List Name
Applies a filter access list to update messages received from this neighbor.
Outgoing Community
Access List Name
Applies a filter access list to update messages sent to this neighbor.
Incoming Route Map
Number
Applies a route map to update messages received from this neighbor.
Outgoing Route Map
Number
Applies a route map to update messages sent to this neighbor.
Neighbor Alias
Address
Additional address used by the other router.
STEP THREE
Figure 9.5 shows an example of a route that could be filtered out. The preferred route from 5 to 1 is through 4, with
6 serving as a reliable backup. Any route received from neighbor 2 which includes 5 will probably be a duplicate
of the equivalent route received from 4. In order to reduce the size of the routing table, all routes received from 2
than contain 5 can be filtered out of incoming update messages.