Chatsworth Products KVM Over IP - Manual (Page 46)

46
3.5.3 Video
Under KVM Settings, select Video to change the video settings.
Video Settings
• Miscellaneous Video Settings
o Noise filter: This option defines how the IP console reacts to small changes in the video
input signal. Turning on the noise filter can help reduce video flickering that is often
caused by distortions, as well as lowering unnecessary bandwidth consumption. A large
filter setting needs less network traffic and leads to a faster video display, but small
changes in some display regions may not be recognized immediately. A small filter
displays all changes instantly but may lead to a constant amount of network traffic even
if the display content is not really changing (depending on the quality of the video input
signal). The default setting should be suitable for most situations.
o Force Composite Sync (Required for Sun Computers): When connecting the device
directly to legacy Sun computer (with composite sync as the video output), it may be
possible that the IP console does not recognize the composite sync automatically. To
support signal transmission from a Sun machine, enable this option. If not enabled the
picture of the remote console will not be visible.
To set the options, click on the button “Apply.”