Chatsworth Products KVM Over IP - Manual (Page 62)

62
3.7.4 Unit Reset
This section allows you to reset specific parts of the device. This involves the keyboard and
mouse, the video engine and the IP console.
To reset a certain IP console functionality click on the button Reset as displayed in the figure
below.
Unit Reset
Resetting the switch (Reset Device) is mainly needed to activate a newly updated firmware. It
will close all current connections to the administration console and to the Remote Console. The
whole process will take about half a minute.
Resetting sub devices (Keyboard & Mouse, USB, Video Engine) will take some seconds only
and does not result in closing connections.
Note: Only the super user is allowed to reset the IP console.