Chatsworth Products KVM Over IP - Manual (Page 56)

56
3.6.6 Date And Time
This link refers to a page, where the internal real-time clock of the IP console can be set up (see
the figure below).
Device Settings for Date and Time
You have the possibility to adjust the clock manually, or to use a NTP timeserver. Without a
timeserver, your time setting will not be persistent, so you have to adjust it again, after IP
console loses power for more than a few minutes. To avoid this, you can use a NTP timeserver,
which sets up the internal clock automatically to the current UTC time. Because NTP server
time is always UTC, there is a setting that allows you to set up a static offset to get your local
time.
Warning!
There is currently no way to adjust the daylight saving time automatically. So
you have to set up the UTC offset twice a year properly to the local rules of
your country.