Axis Communications 2460 - Manual (Page 11)

AXIS 2460 User’s Manual Checking The Hardware Inventory 11
Mounting the Recorder
Important!
The unit is designed for conventional rack mounting, using the 2 brackets and screws
supplied. To fit the brackets, remove the 2 foremost screws on each side panel and then
screw the bracket on, as shown in the illustration below.
Checking The Hardware Inventory
Check the items supplied with your AXIS 2460 against the list below and contact your
dealer if you find anything is missing or damaged.
* If the unit is supplied with hard disks, then these kits are already installed.
The AXIS 2460 is intended for indoor use only.
Item Description Quantity Item Description Quantity
AXIS 2460 Network DVR 1 Power Cord 1
Null Modem Cable 1m 1 Rack Holder
Kit 2 brackets, 2
screws 1
This Document AXIS 2460 User’s Man-
ual v1.1 1 Hard disk
Holder Kit * 0, 1 or 2
Disk Media AXIS Network Product CD
v1.2 (or later) 1 Warranty
Document 1
Remove the 2 screws on the side panel. Mount the bracket as
shown, using one of the supplied screws for the third hole.