Axis Communications 2460 - Manual (Page 60)

Other IP Setup Methods AXIS 2460 User’s Manual 60
Notes for Macintosh Users
Important!
The AXIS 2460 supports TCP/IP over Ethernet, or PPP Modem dial-up. You must use
TCP/IP on your Macintosh network, as there is no support for AppleTalk.
When using the AXIS 2460 on a Macintosh, please observe the following points:
• The DVR has a default IP address of 192.36.253.80.
• Assign a temporary IP address to a Mac workstation in the same subnet (e.g. 192.36.253.81)
and then connect to the DVR.
• Reset the correct IP address for the Macintosh workstation.
• Changing the IP address for a Macintosh does not require a reboot.
The AXIS 2460 was developed for use with Microsoft Internet Explorer (5.0 or higher) running on Win-
dows 98/ME/XP/NT or 2000. This is because the viewing of live images and the built-in Video Player both
require an ActiveX control for their function, something which is currently only supported by Internet
Explorer. Other browsers and other operating systems can be used for installing the unit and also for
administration purposes, but the Video Player will not function correctly.