Axis Communications 2460 - Manual (Page 14)

Installing the AXIS 2460 Network DVR AXIS 2460 User’s Manual 14
Verifying and Completing the Installation From Your Browser
1. Start your browser and enter the IP address of your AXIS 2460 in the location/address
field. Any cameras connected to the unit will be shown as disabled. Click the links
provided to enable them. See also Connecting and Configuring Cameras on page 18.
2. After connecting and enabling your cameras, live images will then be visible in your
browser. To see the image from a single camera, click on the camera link above the
images.
3. Continue the unit’s configuration using the Administration Tools.
The Administration
tools. Links to individual
cameras.