Axis Communications 2460 - Manual (Page 17)

AXIS 2460 User’s Manual Installing the AXIS 2460 Network DVR 17
Step 3 - Verifying the Connection and Completing the Installation
Having started your Dial-Up connection, as described above, you can quickly test the
connection by accessing the AXIS 2460 from your browser (Internet Explorer).
The cameras will be shown as disabled or there will be No connection. See Connecting and
Configuring Cameras on page 18 for information on how to enable cameras.
❺ After clicking Finish in the Network
Connection Wizard, the Dial-up dialog
opens. Click
Properties.
❻ Select the installed modem and
click Configure.
❽ Finally, enter the default User
name Root and the password
pass. Click Dial.
❼ Set the Maximum Speed to 115200
bps. Click OK twice to get back to the
dial-up dialog.
❷ The start page of the AXIS 2460 opens.
The Administration tools are here.
❶ Type in any URL containing a period in the address field
of your browser to display the AXIS 2460 Start Page, as
shown here.
abc.xyz