Axis Communications 2460 - Manual (Page 37)

AXIS 2460 User’s Manual System Options 37
System Options
This section lists and describes those administration tools used for the general
configuration of the AXIS 2460 Network DVR - the System Options. The topics covered
are, for example, network settings, date and time settings, users, etc. For information on
how to set up events, configure alarms, play back recordings, etc., please see the relevant
chapters.
Important!
Accessing The System Options
The System Options can be used for configuring and managing your AXIS 2460 at any
time. Follow the instructions below to access the System Options from your browser:
1. Start your browser and enter the IP address of the AXIS 2460 in the location/address
field. If you are accessing the unit via the Null Modem Cable, you can alternatively
enter any text containing a period, for example;
my.2460
2. The AXIS 2460 start page is displayed. Click Administration and then System Options.
• When accessing the AXIS 2460 for the first time, you will be assumed to be the product’s administra-
tor and will be logged in as such, with the user name root and the default password pass.
• You should change the root password as soon as possible. Until this has been done, the security fea-
tures in the product will not be enabled. Furthermore, all Axis products are shipped with the same
password by default. For further information, refer to Users, on page 45.
• Javascript must be enabled in your browser for the AXIS 2460 Web-based interface to work.