Axis Communications 2460 - Manual (Page 40)

System Options AXIS 2460 User’s Manual 40
Media type - This can be used to change the network speed for your AXIS 2460. Normally,
there is no need to use anything other than Auto-negotiate, which will automatically
select the correct media type. However, if you are using a switch or similar device on your
network and need to specify the media type, then this can be done by selecting the correct
type from the drop-down list.
HTTP Port - Enter the HTTP port the AXIS 2460 will use. The default setting is 80. Alterna-
tively, any port in the range 1024-65535 may be used, but check first with your system
administrator before changing the default setting. See also Firewall Settings, on page 46.
Bandwidth Control
Using the Network Bandwidth Use drop-down list, it is possible to define the maximum
bandwidth used by the DVR. This can help minimize the impact on other services running
on your network, which is useful when connecting to busy networks. The options are; 0.1
to 2.0 MBit/s or Unlimited.
Mail Settings
The AXIS 2460 can be configured to send event and error e-mail messages to predefined
addresses.
Mail Servers
Primary Mail Server - Enter the name or IP address of the server providing your mail
facilities.
Secondary Mail Server - Enter the name or IP address of a secondary mail server. This will be
used if the primary mail server is unavailable.
Use Modem - Check this box to use a modem for sending e-mail messages. Note that
COM-Port 2 must be configured to use a modem.
Event Message Settings
E-mail Address - Specify the recipient for e-mails sent when a recording is made. E-mails
will only be sent for those events that have been configured to do this.