Axis Communications 2460 - Manual (Page 54)

The LED Indicators AXIS 2460 User’s Manual 54
Appendix B - The LED Indicators
The front panel LED indicators use different colors to indicate the unit’s status. The various
indications are as follows:
Notes: •The indicators will also show amber at initial power to the unit, as well as green and/or red dur-
ing the unit’s start-up phase. This is normal and does not indicate a malfunction.
•The Power indicator also flashes green and amber during a firmware upgrade.
Indicator Green Amber Red
Power Solid for normal operation. Goes to amber when powering down.
Network Flashes for 100 Mbit activity. Flashes for 10 Mbit activity. Solid red indicates no network con-
nection.
Disk Flashes green when reading
from the disk. Flashes amber when writing to the
disk. Flashes red for a non-functional disk.
Shows solid red if ALL disks are out of
action.
Status Solid for normal operation. Solid during second stage of flash
upgrade or factory default. Flashes
during system initiation. Flashes slow red for an illegal serial
number. Return the unit to Axis.
Video Solid for video signal present,
but no recording in progress. Solid amber for video signal present
and recording in progress. Solid red for no video signal.
Alarm The alarm inputs will show yellow whenever an alarm is triggered on the input.