Waiting for pairing, Usin g b lue to ot h – Samsung SPH-M620ZKASPR User Manual
Page 251
Section 2K: Using Bluetooth Wireless Technology
225
Usin
g B
lue
to
ot
h
4.
Use the Navigation Pad to enter the numeric passkey
and select Done (
). You are then notified that
Pairing is in progress.
5.
Use your phone’s keypad to enter a new Device Name
for the device and press
to save and exit.
6.
Highlight the device and select
for Connect.
(Connection Successful will be displayed if the device is
communicating properly.)
Waiting for Pairing
If you are going to be using a Dial-Up Network (DUN) profile
to pair with a PC or PDA, you will need to allow the other
device to initiate pairing with your phone.
To allow your phone to be paired with another Bluetooth device:
1.
Verify your headset/device is powered and is configured
for pairing. (This typically involves configuring your
headset/device to transmit a signal that it is searching
for a Bluetooth phone).
2.
Select Menu > Tools > Bluetooth > Trusted Devices.
3.
Highlight Add New and press
.
4.
Select Wait for request and press
.
5.
The visibility pop-up screen is displayed.
6.
Follow the onscreen prompts to enter your passkey and
select Done (
).
Note:
UpStage does not support Bluetooth headsets with MP4 files.
LS
LS
MENU
OK
LS
LS
LS
LS