Entering characters by tapping the keypad, Once for the first letter, Twice for the second letter – Samsung SPH-M620ZKASPR User Manual
Page 94: And so on
68
ᮣ
To accept a word and insert a space, press
.
Entering Characters by Tapping the Keypad
To enter characters by tapping the keypad:
1.
Select the Alpha mode (See “Selecting a Character Input
Mode” on page 65).
2.
Press the corresponding keys repeatedly until the
desired letter appears.
Ⅲ
Once for the first letter
Ⅲ
Twice for the second letter
Ⅲ
And so on
3.
To enter the word “Bill,” press
twice,
three
times,
three times, and
three times again.
(If you make a mistake, press
to erase a single
character. Press and hold
to delete an entire entry.)
Note:
Since the T9 prediction listing starts at three letters, when
working with two letters, use the (0) key to begin cycling
through possible two-letter choices. If, as an example, you
type the word
Go
(keys 4 and 6), T9 prediction might provide
the word
In
, but by pressing the (0) key you can cycle through
to the next possible word choice, which is
Go
.
Tip:
When entering text in this mode, press the
*
(Shift) key to
change letter capitalization (
abc
>
Abc
>
ABC
) used on the
current character.
#
Space
2
ABC
4
GHI
5
J L
K
5
J L
K
BACK
BACK