Voice command tips, Voice-activating your contacts list, Voice settings – Samsung SCH-U520ZNAUSC User Manual
Page 129: Choice lists, Sensitivity
Tools 129
Voice Command Tips:
•
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and voice-activates all
the names stored there. When you have add or change contacts, VoiceSignal
automatically reloads and voice-activates the entire list.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call before you can use
VoiceSignal again.
Voice Settings
Choice Lists
VoiceSignal uses choice lists when it is not confident it has correctly recognized a
name or number. In this case, it can display a list of up to three possible choices, and
prompt you to confirm the correct one.
You can change the way that VoiceSignal uses choice lists with name dialing, digit
dialing, and contacts. For each feature, you can choose to always see a choice list
(even if there is only one choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal displays a choice list
only when it is not confident it has correctly recognized the name or number.
To change the way VoiceSignal uses choice lists:
1.
In standby mode, press the MENU key (
), then press
(for Tools),
and
(for
Voice Service),
(for
Voice Settings), and
for
Choice Lists the following options appear in the display:
• Automatic—VoiceSignal displays a choice list only when it is not sure if it has
correctly recognized the name or number.
• Always On—VoiceSignal always displays a choice list, even when there is only
one choice.
• Always Off—VoiceSignal never displays a choice list.
Use the navigation keys to highlight the Choice List behavior you prefer,
then press the
key to accept the new setting.
Sensitivity
1.
In standby mode, press the MENU key (
), then press
(for Tools),
and
(for
Voice Service),
(for
Voice Settings), and
for
Sensitivity. The Sensitivity screen appears in the display.
OK
@
)
)
@
)
)
OK
OK
@
)
)