Samsung SCH-U520ZNAUSC - Manual (Page 26)

26
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold the key.
“Say a Command” appears in the display and is pronounced through the
earpiece.
2. Say, “Call”.
You are prompted to “Say the name or #”.
3. Speak clearly and say the name of a person in your Contacts list, first name
followed by last name.
If the name is recognized, Call repeats the name and dials the number.
If Call is not sure which name you said, it displays a choice list of up to
three names and prompts you with “Did you say?” followed by the first
name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next name, or use the
keypad to select the correct name from the list. (See “Choice Lists” on
page 129, for more information.)
• Press the Help (right) soft key ( ) to say the name again.
• Press the Settings (left) soft key ( ) then press the Exit right soft key ( )
to exit Call without dialing.
If the recognized name has multiple numbers stored for it (that is, Mobile,
Work, Home, and so on), Voice Dial displays the possible choices and
prompts you with “Which number?”
5. Say one of the following number types:
• “Mobile”
• “Work”
• “Home”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Call, do the following:
1. In standby mode, press and hold the key.
“Say a Command” appears in the display and is pronounced through the
speaker.
2. Say “Call”.
VoiceSignal prompts you to “Say the name or #.”