Samsung SCH-U520ZNAUSC - Manual (Page 25)

Call Functions 25
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 010 through 099.
1. In standby mode, press and release the number key representing the first
digit of the desired Contact’s Location number.
2. Press and hold the number key representing the second digit of the desired
Contact’s Location number.
Example: To speed dial the Contact assigned Location 035, press then press and hold the key.
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1. In standby mode, press and release the number key representing the first
digit of the desired Contact’s Location number.
2. Press and release the number key representing the second digit of the
desired Contact’s Location number.
3. Press and hold the number key representing the third digit of the desired
Contact’s Location number.
Example: To speed dial the Contacts entry assigned to Location 325, press , press , then press
and hold the key.
Voice Dialing
The voice recognition capabilities of your SCH-u520 are exceptional due to
advanced, speaker-independent technology. This means you do not need to “train”
your phone to understand your voice. You can use your voice in a natural manner to
dial numbers.
Note: End Calls Before relaunching the VoiceSignal voice recognition software — When you use
Voice Dialing to make a call, you must end that call before you can use other Voice Commands. See
for more information.
Use the Call command to dial any number stored in your Contacts list by saying the
name of the contact (Name Dialing). You can also use the Call command to dial any
telephone number, even numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone on the phone.
• When saying a name, say the first name then the last name.