Samsung SCH-U520ZNAUSC - Manual (Page 61)

Understanding Your Contacts 61
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number, do the following:
1. Follow either of the New Contacts entry procedures (see “Adding a New
Contacts Entry“ on page 54) until you enter a name for the entry.
2. After entering the Contacts entry name, do not press the key. Instead,
use the navigation keys to highlight the number field.
3. Press the Options (right) soft key ( ). The following options appear in
the display:
• Set Speed Dial — Assign a speed dial number.
• Set As Default — Set the number the phone will dial when Contacts dialing.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes (see “Add
Pauses to Contacts Numbers“ on page 56 for more information).
Use the navigation keys to highlight Set Speed Dial, then press the
key. The Speed Dial screen appears in the display.
4. Use the navigation keys to highlight an Unassigned Speed Dial number or
enter an Unassigned Speed Dial number in the Go To field using the
keypad.
Important!: Do not enter Speed Call numbers 001, 211, 311, 411, 611, or 911. These numbers are already
assigned to Voicemail (001), to special network features (211, 311, 411, and 611), and to
emergency use (911).
5. Press the SET key ( ). You are prompted to confirm your Speed Dial
number assignment.
6. Press the Yes (left) soft key ( ) to save your Speed Dial assignment
and return to the Add New Entry screen.
Note: Press the No (right) soft key ( ) to discard the assignment and return to the Speed Dial screen.
7. Press the key to save your changes.
Changing a Speed Dial Location
1. Find the Contacts entry you want to edit. See “Finding a Contacts Entry“ on
page 53 for more information.
2. Use the Up and Down navigation keys to highlight the desired entry.
3. Press the Edit (left) soft key ( ).
4. Use the Up and Down navigation keys to highlight the number field
marked by the Speed Dial icon ( ).
OK
OK
OK
OK