Sound – Samsung SCH-U520ZNAUSC User Manual
Page 131
Tools 131
• If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the digits again. Wait
for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
4.
After confirming that the recording sounds “ok”, continue the recording
process with the next set of digits.
5.
After six sets of digits, the phone asks whether you want to do more
adaptation. Answer “Yes.”
6.
Repeat steps 4 and 5 for another six sets of digits. After the second group
of six sets of digits, “Adaptation complete” plays through the speaker
and you are returned to the Adapt Digits menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1.
In standby mode, press the MENU key (
), then press
(for Tools),
and
(for
Voice Service),
(for
Voice Settings), and
for
Digit Dialing. The following options appear in the display:
• Adapt Digits
• Reset Digits
2.
Use the navigation keys to highlight Reset Digits, then press the
key.
The phone prompts you to confirm digit rest.
3.
Use the navigation keys to select Yes to reset your digit adaptation, or No
to cancel.
4.
Press the
key to reset digit dialing and exit.
Sound
Sound lets you specify what (if any) text prompts you want your phone to read to you
through the earpiece.
1.
In standby mode, press the MENU key (
), then press
(for Tools),
and
(for
Voice Service),
(for
Voice Settings), and
for
Sound. The following options appear in the display:
• Prompts — Enables (On) or disables (Off) audio prompts.
• Digits — Enables (On) or disables (Off) audio digit playback.
• Names — Enables (On) or disables (Off) audio name playback.
• Name Settings — Lets you adjust the speed and volume of your phone’s audio
name playback.
2.
Use the navigation keys to highlight the desired setting.
3.
Press the
key to accept the new setting.
OK
@
)
)
OK
OK
OK
@
)
)
OK