Resetting your phone – Samsung SCH-U520ZNAUSC User Manual
Page 150
150
Important!: Because of various transmission methods, network parameters, and user settings necessary
to complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or
emergency communications.
Remember to always turn your phone on and check for adequate signal strength
before placing a call.
•
Store Emergency Numbers
1.
In standby mode, press the MENU key (
), then press
(for
Settings), and
(for Phone Settings), and
for Security. You’re
prompted to enter the lock code.
Tip: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then press
for Emergency #.
3.
Press
,
, or
to select from the three emergency number
entries.
4.
Enter an emergency number (up to 32 digits in length).
5.
Press the
key to save the number that you entered.
•
Call Emergency Numbers in Lock Mode
1.
In standby mode, enter the emergency number.
2.
Press the
key to place the call.
Resetting Your Phone
Reset Phone returns all setup options to their factory default.
1.
In standby mode, press the MENU key (
), then press
(for
Settings), and
(for Phone Settings), and
for Security. You’re
prompted to enter the lock code.
Tip: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then press
for Reset Phone. A prompt appears
in the display asking if you wish to restore default settings (except for the
Contacts and Voice Dial).
3.
Press the Yes (left) soft key (
) to restore default settings or press the
No (right) soft key (
) to return to the Security sub-menu.
OK
@
)
)
OK
SEND
OK