Send picture messages in standby mode – Samsung SCH-U520ZNAUSC User Manual
Page 70
70
Note: You can record and insert a voice memo of up to 60 seconds in length if you record first before
attaching a picture. (See “My Sounds” on page 124 for more information.) If a picture is attached
before recording, the size of the voice memo is limited to the amount of remaining memory.
12.
Use the Up/Down navigation keys to highlight an sound file, then press the
key to insert a sound into your message. Press
to exit the pop-
up menu without inserting a sound.
You can now send or preview the Picture message.
13.
To preview the Picture message before sending, press the Options
(right) soft key (
), then
select Preview from the list of options that
appears in the display.
14.
To send the Picture message now, press the SEND key (
). Pic Msg
Sending appears in the display and a progress bar indicates the send
status.
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible phone or other device, and
accompany the Picture message with a voice memo, ring tone, or downloaded ring
tone.
1.
In standby mode, press the Message (left) soft key (
), then press
(for Send Message) and
for Picture Message. The Create Pic
Msg screen appears in the display with the Send To tab highlighted.
2.
Enter the phone number(s) or e-mail address(s) of the recipient of the
Picture message.
Tip: Press the Add (right) soft key (
) to display a pop-up menu that lets you search your Contacts for
a recipient, select a Group as recipient, browse the Recent Calls log for a recipient, or send the Picture
message to the OnlineAlbum.
3.
Press the
key to move the cursor to the Subject field, then enter a
subject for the Picture message using the keypad.
See “Entering Text” on page 47 for more information.
4.
Use the Up and Down navigation keys to highlight the Text field.
5.
Enter the message text using the keypad.
See “Entering Text” on page 47 for more information.
6.
At any point while composing text for the picture message, press the Left
soft key (
) to change the text entry mode. The following options
appear in the display:
• T9Word
OK
CLR
OK
@
)
)
OK