V.35 wan cable, Pin connections – Avaya IP OFFICE 40DHB0002USCL User Manual
Page 64
Page 64 - Cables
Technical Data
V.35 WAN Cable
SAP Code:- 700213424
A
B
C
D
E
A 37 Way D-Type Plug with UNC 4-40 locking screws.
B 34 Way MRAC Plug.
C Label
D 10 twisted pair screened cable - each core is 7/0.203mm (24 AWG) tinned copper stranded wire,
nominal capacitance of 98pF/m, impedance of 80
Ω ± 10% at 1MHz, screened with aluminized
tape and a tinned copper wire drain.
E 3 meters.
Pin Connections
End A
Name
Cable Notes
End B
8
DTR (Data Terminal Ready)
-----
H
11
DCD (Data Carrier Detect)
-----
F
12
CTS (Clear To Send)
-----
D
27
RTS (Request To Send)
-----
C
29
RI (Ring Indicator)
-----
J
30
DSR (Data Set Ready)
-----
E
32
Transmit Data - A
P
14
Transmit Data - B
Twisted Pair
S
35
Receive Data - A
R
16
Receive Data - B
Twisted Pair
T
36
Transmit Clock - A
Y
17
Transmit Clock - B
Twisted Pair
AA
37
Receive Clock - A
V
18
Receive Clock - B
Twisted Pair
X
33
External Clock - A
U
15
External Clock - B
Twisted Pair
W
34 Ground
-----
B
Connect pins 7 and 25 to pin 6 at End A only.
Pin 19 at end A is connected to the Screened Cable Drain Wire.
The maximum core to core capacitance must not exceed 800pF.
This cable is used to connect a WAN port to a Digital leased Line.
Page 64 - Technical Data
IP Office Installation Manual
Cables
40DHB0002USCL – Issue 7 (09/25/2002)