Allied Telesis AT-S63 - Manual (Page 364)

Chapter 32: Internet Protocol Version 4 Packet Routing
364 Section VII: Routing
Supported Platforms
Refer to Table 100 and Table 101 for the AT-9400 Switches and the
management interfaces that support the IPv4 packet routing feature.
Here are a few things you need to know about the supported platforms
and the management interfaces for the IP packet routing feature:
 The Layer 2+ models do not support IP packet routing. However, you
can create one IP routing interface to assign the switches an IP
configuration, which is required by some management features. For
further information, refer to “Routing Interfaces and Management
Table 100. Support for IPv4 Packet Routing
Switch Supported
Layer 2+ Models
AT-9408LC/SP One interface
AT-9424T/GB One interface
AT-9424T/SP One interface
Basic Layer 3 Models
AT-9424T Yes
AT-9424T/POE Yes
AT-9424Ts Yes
AT-9424Ts/XP Yes
AT-9448T/SP Yes
AT-9448Ts/XP Yes
AT-9400Ts Stack Yes
Table 101. Management Interfaces for IPv4 Packet Routing
Switch or Stack
Standard
Command
Line
AlliedWare
Plus
Command
Line
Menus
Web
Browser
Stand-alone Switch Yes Yes Yes
AT-9400Ts Stack Yes Yes