At-stackxg stacking module, Figure 1: at-stackxg stacking module – Allied Telesis AT-S63 User Manual
Page 67
Advertising
AT-S63 Management Software Features Guide
Section I: Basic Operations
67
AT-StackXG Stacking Module
To be part of a stack, the AT-9400Ts Switch must have the AT-StackXG
Stacking Module, shown in Figure 1. You install the module in the switch’s
expansion slot on the back panel. The installation instructions are provided
in the AT-9400Ts Stack Installation Guide.
Figure 1. AT-StackXG Stacking Module
1240
AT-LX44CPUCVR
AT-StackXG
Stack Por
t 1
Stac
k Por
t 2
Advertising