Allied Telesis AT-S63 - Manual (Page 452)

Chapter 37: Web Server
452 Section IX: Management Security
6. After receiving the certificates from the CA, download them into the
switch’s file system using the LOAD METHOD=TFTP or LOAD
METHOD=XMODEM command.
7. Add the certificates to the certificate database with the ADD PKI
CERTIFICATE command.
8. Disable the web server with the DISABLE HTTP SERVER command.
9. Activate HTTPS in the web server with the SET HTTP SERVER
command.
10. Enable the web server with the ENABLE HTTP SERVER command.
For an example of this command sequence, refer to the SET HTTP
SERVER command in the AT-S63 Management Software Command Line
Interface User’s Guide.