Allied Telesis AT-S63 - Manual (Page 49)

AT-S63 Management Software Features Guide
49
Manager Access Levels
The AT-S63 Management Software has two manager access levels of
manager and operator. The manager access level lets you view and
configure the operating parameters, while the operator access level lets
you only view the parameters settings.
You log in by entering the appropriate username and password when you
start a management session. To log in as a manager, type “manager” as
the login name. The default password is “friend.” The username for
operator is “operator” and the default password is also “operator.” The
usernames and passwords are case sensitive.
There can be up to three active manager sessions at a time on a switch.
This is set with the SET SYSTEM command in the command line
interface. The default is just one manager session.
There can be up to nine operator sessions if there are no active manager
sessions. The maximum number of operator sessions is reduced by the
same number of active manager sessions. For instance, if there are two
active manager sessions, the maximum number of operator sessions is
seven.