Alpine CVA-1003R - Manual (Page 33)

31
-EN
Other Useful Features
Setting the Treble Control
You can change the Treble Frequency emphasis
to create your own tonal preference.
1
When the monitor display is open, press the
bass engine button. Bass engine mode is
displayed in the monitor display.
2
Press the Preset 2 button to select the desired
mode.
3
Press the g DN or f UP button to adjust
the selected mode.
• Treble Level : -7~+7
You can emphasize the treble frequency.
• Treble center frequency:
10.0kHz
↔ 12.5kHz ↔ 15.0kHz ↔ 17.5kHz
Emphasizes the displayed Treble frequency
ranges.
4
Press the bass engine button to return to the
normal mode.
NOTES
• If no buttons are pressed within 5 seconds, the Treble
control setting will be turned off automatically.
• Depending on the type of external audio processors
connected to the unit, you may not be able to set some
settings.
• The settings of the Treble will be individually
memorized for each source (FM, MW, LW and CD)
until the setting is changed. Depending on the
connected devices, some functions and display
indications do not work.
Operation with the monitor display closed
You can set the Treble control with the monitor
display closed.
1
Press the bass engine button.
2
Press the Preset 2 button. TREBLE is
displayed for 2 seconds in the sub display,
then the value of TREBLE Level blinks.
3
Each time you press the Preset 2 button, the
blinking shifts.
Example of sub display
4
Press the g DN or f UP button to
adjust the selected mode.