Alpine CVA-1003R - Manual (Page 55)

53
-EN
Installation and Connections
1 Rear/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
2 RCA Extension Cable (Sold Separetely)
3 RGB Cable (Included with Navigation)
4 System Switch
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
Be sure turn the power off to the unit before changing the
switch position.
5 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
6 Ai-NET Cable (Included with DVD video player)
7 RGB Input Connector
Connect to the RGB output terminal of the navigation
system.
8 AUX Video Input (AUX1) Connector
Connect the video output lead of a DVD video player
or DVD changer to this terminal.
9 RCA Extension Cable (Included with DVD Video
Player)
! AUX Audio Input (AUX1) Connectors
(not used for this system)
" Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead.
This lead outputs the controlling signals from the
remote control.
# Ai-NET Cable (Included with CD Changer)
$ Ai-NET Cable (Included with DVD Changer)
% RCA Extension Cable (Included with DVD
Changer)
& RGB/NTSC Output Switch
To display the picture of Navigation system on the
external monitor, place the switch in the NTSC Output
position.
&
3
CVA-1003R
CVA-1003R
(NVE-N055PS)
(NVE-N055PV)
NTSC RGB
Connector Box Navigation
Navigation Connector Box
To Guide output terminal
RCA Extension Cable
(Included with Navigation)
To Video output terminal
When connecting with NVE-N055PS of the Alpine's Navigation System
When connecting with NVE-N055PV of the Alpine's Navigation System
REMOTE OUT REMOTE IN
DISP CONT IN
GUIDE CONT IN
DISP CONT OUT
GUIDE CONT OUT
(White/Brown)
(Yellow/Red)
(White/Green)
(White/Brown)
(Yellow/Red)
(White/Green)
RGB Convertor Cable
KCE-030N (Sold Separately)
GUIDE IN
VIDEO IN