Alpine CVA-1003R - Manual (Page 34)

32
-EN
Other Useful Features
Switching Phase
Before switching Phase, select the Subwoofer ON
(refer to "Subwoofer Control On and Off" on page
39).
1
Press the bass engine button to turn on the
Bass engine mode.
2
Press the Preset 3 button to select Subwoofer
Phase mode.
3
Press the g DN or f UP button to switch
the phase of the subwoofer output.
NORMAL
↔ REVERSE
4
Press the bass engine button to return to the
normal mode.
NOTE
If no buttons are pressed within 10 seconds, the
Switching Phase setting will be off automatically.
Turning Defeat Mode On and Off
When the defeat mode is on, the sound signals
bypass the surround circuits and directly go to the
line output. The equalizer curve, therefore,
becomes flat.
1
Press and hold the bass engine button for at
least 2 seconds to select the DEFEAT mode.
2
Press the g DN or f UP button to set
DEFEAT to ON/OFF.
3
When turning DEFEAT ON, you can return the
settings that you adjusted to the default settings.
DEFAULT:
Bass Level : ± 0
Bass Centre Freq. : 80 Hz
Bass Band Width
: WIDE1
Treble Level : ± 0
Treble Centre Freq. : 10.0 kHz
LOUD
: OFF
4
Press and hold the bass engine button for at
least 2 seconds to return to normal mode.
SETUP
g g g g g DN
f f f f f UP
Preset 1
Preset 3
Example of SETUP Screen
Volume Level Current Time
Selected Mode
Setting items of the
Display Setting
Mode
Selected Preset Number
Setting/Adjusting status
bass engine