Alpine CVA-1003R - Manual (Page 44)

42
-EN
Other Useful Features
NOTES
• When AUX IN (AUX1 IN, AUX2 IN) and NAV.IN are
set to ON, the AUX (AUX1, AUX2) and NAV. mode is
displayed (refer to "Setting the External Input" on
page 38).
• To switch the sound source, press the SOURCE button
during SIMUL. If the picture and the sound are from
the same source, the SIMUL function is not cancelled.
2
Press and hold the V.SEL button for at least 2
seconds to cancel the SIMUL function.
V.SEL
→ → → →
→ → →
Simultaneous Operation
You can watch the video portion of another source
while listening to current source.
1
Press the V.SEL button to select the video
position.
Example
When not connecting the expansion BOX:
(Picture) RADIO AUX
∗
NAV.
(Voice) RADIO RADIO RADIO
When connecting the expansion BOX (KCE-
103V):
(Picture) RADIO AUX1
∗
AUX2 NAV.
(Voice) RADIO RADIO RADIO RADIO
∗ If a DVD player or DVD changer is connected,
the DVD picture will be displayed and the voice
will be produced.
With the DVD player (DVA-5205P) or DVD
changer (DHA-S680P) connected, pressing
and holding the V. OUT button on the remote
control supplied with the DVD player or DVD
changer for at least 2 seconds the picture and
voice of the DVD.