Alto-Shaam ASF-75G - Manual (Page 30)

P R O G R A M M I N G T H E C O N T R O L
“SetPoint
This program allows the operator to change the temperature of the frypot oil/shortening.
The set-point temperature of the oil/shortening can be adjusted from a range of 250°F to
450°F (121°C to 232°C). The factory default is set at 350°F (177°C).
Press the Up or Down arrow keys to scroll until “SetPoint” appears in the display.
Press the right arrow key to enter the program. Display stops flashing. The previously
set temperature will appear in the display. Press the Up or Down arrow keys to
change the setting. When the correct set-point appears, press the right arrow key to
confirm the setting. Display flashes. Press the down arrow key to advance the control
to the next program feature.
To exit the control programming mode at any time, press and hold t he LEFT arrow key .
3 5 0 °F
SetPoint
Gas Fryer Operation & Care Manual • 29
D E L U X E C O N T R O L O P E R A T I O N