Alto-Shaam ASF-75G - Manual (Page 37)

P R O G R A M M I N G T H E C O N T R O L
“Language” The language option is only available in English “ENG” at this time.
“TempDisp” The operator can choose to have the fryer oil temperature continuously shown in the
display during a product cooking sequence by selecting “ON” or to a normal display
sequence by selecting “OFF.” The function is set to “ON” at the factory.
Press the Up or Down arrow keys to scroll until “TempDisp” appears in the display.
Press the Right arrow key to enter the program. Display stops flashing. The current
setting of “ON” or “OFF” will appear in the display. Press the Up or Down arrow
keys to change the setting. When the correct setting appears, press the Right arrow key
to confirm the setting. Display flashes. Press the Down arrow key to advance the
control to the next programming function.
“AlarmSet” The operator is able to set the volume of the fryer alarm to off, low, medium or high
“OFF”
, “LO”, “MED” or “HI.” The alarm is set to “HI” when received from the factory.
Press the Up or Down arrow keys to scroll until “AlarmSet” appears in the display.
Press the Right arrow key to enter the program. Display stops flashing. The current
setting will appear in the display. Press the Up
or Down arrow keys to toggle among
the available choices. When the correct setting appears, press the Right arrow key to
confirm the setting. Display flashes. Press the Down arrow key to advance the control
to the next programming function.
“IdleMode” The idle mode allows the operator to set a period of time during which the fryer is not
being used but still maintains full fryer oil temperature. When idle time expires, the fryer
oil temperature will drop to 250°F (121°C) at which point the oil/shortening must be
reheated before frying additional product. This time period can be adjusted between
“OFF”
and 60:00 minutes. The factory default is set at 30 minutes idle time.
Press the Up or Down arrow keys to scroll until “IdleMode” appears in the display.
Press the Right arrow key to enter the program. Display stops flashing. If no idle time is
required, press the Down
arrow key until “OFF”appears in the display. Press the Up
or Down arrow keys to change the setting. When the correct setting appears, press the
Right arrow key to confirm. Display flashes. Press the Down arrow key to advance
the control to the next programming function.
“IdleMode” can be interrupted at any time by pressing any of the 12
product preset keys. The fr yer will immediately begin to preheat to the
set-point temperature. The baskets can be dropped only after the set-
point temperature has been reached.
E N G
Language
O N
TempDisp
H I
Alarm Set
3 0 : 0 0
IdleMode
To exit the control programming mode at any time, press and hold t he LEFT arrow key .
Gas Fryer Operation & Care Manual • 36
D E L U X E C O N T R O L O P E R A T I O N