Appendix d: nfs error codes and port status, Table d.1: nfs error codes – Avocent CCM User Manual
Page 119
Appendices 105
Appendix D: NFS Error Codes and Port Status
Table D.1 describes the error codes that may be reported by the CCM appliance for NFS history
file operations. Your display may also have additional descriptive information.
Table D.1: NFS Error Codes
Error
Code
Description
1
An unidentified error was encountered. Check the console output for possible additional information.
2
Internal CCM mount or unmount error.
3
The file type is incompatible with the port filename.
4
A port history filename error occurred.
5
A port history file write error occurred.
6
A port history file overrun error occurred.
7
From the remote procedure call: arguments cannot be encoded.
8
From the remote procedure call: the result cannot be decoded.
9
From the remote procedure call: unable to send.
10
From the remote procedure call: unable to receive.
11
From the remote procedure call: a time-out occurred.
12
From the remote procedure call: RPS versions were incompatible.
13
From the remote procedure call: an authentication error occurred.
14
From the remote procedure call: a program was unavailable.
15
From the remote procedure call: a program/version mismatch occurred.
16
From the remote procedure call: a procedure was unavailable.
17
From the remote procedure call: the server cannot decode the arguments.
18
From the remote procedure call: a remote system error occurred.
19
From the remote procedure call: an unknown host was encountered.
20
From the remote procedure call: a port mapper failure occurred.
21
From the remote procedure call: the program was not registered.
22
From the remote procedure call: the RPC failed due to an unspecified error.
23
From the remote procedure call: an unknown protocol was encountered.