Avocent CCM - Manual (Page 72)

58 CCM Installer/User Guide
Example
The following command copies the alert strings defined on port 1 to port 17, replacing any
previously defined alert strings on port 17.
port 17 alert copy 1
Port Alert Delete command
The Port Alert Delete command deletes one or more alert strings from a port. When you issue this
command, a numbered list of defined alert strings is displayed, from which you choose those to be
deleted. You may enter one or more numbers separated by commas, a range of numbers separated
by a hyphen or type
ALL to specify all strings. Pressing Enter cancels the command.
For more information, see Managing the CCM Appliance Using SNMP on page 39.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Syntax
PORT <port> ALERT DELETE
Example
The following command deletes defined alert strings from port 26.
> PORT 26 ALERT DELETE
Alert-strings assigned to port 26:
1) The first alert string
2) The second alert string
3) The third alert string
4) The fourth alert string
Select Alert-string(s) to delete>
The alert string numbers specified at the prompt will be deleted.
Table 5.7: Port Alert Copy Command Parameters
Parameter Description
<to_port> Port number or name where alert strings will be copied.
<from_port> Port number or name from which alert strings will be copied.
Table 5.8: Port Alert Delete Command Parameter
Parameter Description
<port> Port number or name.