Avocent CCM - Manual (Page 61)

Chapter 4: Using CCM Appliance Commands 47
Command Summary
Table 4.4 lists the CCM appliance commands, including a brief description plus the required access
rights and level.
Table 4.4: CCM Appliance Command Summary
Command Description, Access Right and Access Level
Connect
Accesses devices from the console port.
Access right: port-specific
Access level: ADMIN or APPLIANCEADMIN (Users who do not have the ADMIN or
APPLIANCEADMIN level must have the appropriate port access configured to issue
this command.)
Disconnect
Ends a device session initiated with Connect command.
Access right: port-specific
Access level: ADMIN or APPLIANCEADMIN (Users who do not have the ADMIN or
APPLIANCEADMIN level must have the appropriate port access configured to issue
this command.)
Help
Displays information about commands.
Access right: none needed
Access level: all
NFS
Enables/disables using an NFS server to hold device session data.
Access right: SCON
Access level: APPLIANCEADMIN
NTP
Enables/disables using an NTP server to update the time on the appliance.
Access right: SCON
Access level: APPLIANCEADMIN
Port Alert Add
Adds a port alert string.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Port Alert Copy
Copies a port’s alert strings to another port.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Port Alert Delete
Deletes one or more port alert strings.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Port Break
Sends a break signal to the attached device.
Access right: BREAK
Access level: ADMIN or APPLIANCEADMIN
Port History
Accesses the port history buffer.
Access right: none needed
Access level: all