Avocent CCM - Manual (Page 86)

72 CCM Installer/User Guide
Server Share command
The Server Share command configures the share mode. For more information, see Session sharing
on page 23.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SHARE [DISABLE|AUTO|QUERY]
Server SNMP command
The Server SNMP command enables or disables SNMP UDP port 161 SNMP processing. When
you disable SNMP processing, you may still enable and disable traps with the Server SNMP
Trap command.
For more information, see Managing the CCM Appliance Using SNMP on page 39.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SNMP ENABLE|DISABLE
MASK=<subnet> Subnet mask for the subnet on which the CCM appliance resides.
GATEWAY=<gtwy> IP address of default gateway for routing IP packets.
Table 5.20: Server Set Command Parameters
Parameter Description
Table 5.21: Server Share Command Parameter
Parameter Description
DISABLE Disables session sharing. Only one connection per port will be allowed.
AUTO Enables automatic session sharing (subject to preemption based on access level).
QUERY
Enables session sharing when permission is obtained from the session originator
(subject to preemption based on access level). This is the default value.
Table 5.22: Server SNMP Command Parameter
Parameter Description
ENABLE|DISABLE
Enables or disables SNMP processing.
Default = Enabled