Avocent CCM - Manual (Page 79)

Chapter 5: CCM Appliance Commands 65
Server Commands
The Server command has several forms, as listed in Table 5.13.
Server CLI command
The Server CLI command:
•
Specifies the console port type
• Specifies the CLI access character
• Enables or disables device connection from the console port
• Specifies a modem initialization string
• Specifies port history mode operations
• Specifies a port time-out value
Table 5.13: Server Command Summary
Command Description
Server CLI
Specifies the console port type, CLI access character, modem initialization
string, port history mode operations and port time-out value. It also enables/
disables device connection from the console port.
Server FLASH Updates the unit’s FLASH.
Server Init Reinitializes the CCM appliance.
Server PPP Enables/disables PPP connections to the console port.
Server RADIUS Specifies RADIUS server parameters.
Server Reboot Reboots the unit.
Server Security
Specifies user authentication method, enables/disables security lock-out
and enables/disables connection methods.
Server Set Changes the CCM appliance network configuration.
Server Share Specifies session sharing settings.
Server SNMP Enables/disables UDP port 161 SNMP processing.
Server SNMP Community Defines read, write and trap SNMP community strings.
Server SNMP Manager Defines/deletes SNMP management entities.
Server SNMP Trap Enables/disables SNMP traps.
Server SNMP Trap Destination Defines/deletes destinations for enabled SNMP traps.
Server SSH
Enables/disables SSH session access to the CCM appliance and specifies
the SSH authentication method.