Karcher Système de recyclage des eaux usées WRP 16000 User Manual

Page 17

Advertising
background image

-

5

1 Sludge collection of the recycling sys-

tem *)

2 Empty remaining tank content (Option)
3 Float switch, S5 pump basin full (option)
4 Float switch S14 for salt exfiltration (op-

tion)

5 Float switch S15 pump basin for dry run

protection

6 Immersion pump (option)
7 Pump basin of the recycling system *)
8 Membrane ventilator (option)
9 Control shaft *)
10 to drainage system *)
11 Ventilation (option)
12 Backwash throttle
13 Multi-channel valve
14 Conductivity sensor (option)
15 Gravel filter
16 Shutoff valve recycled water
17 Overflow of recycled water tank (option)
18 Fresh water volume settings (option)
19 Freshwater - emergency filling (option)
20 Circulation valve (option)
21 Recycled water tank (option)
22 Float switch (option)
23 Fresh water inlet for rinsing and care

processes *)

24 Washing unit *)
25 Circulation pump (option)
*) on building side

In filter operations, the water flows via

Immersion pump

multi-channel valve in position FIL-
TERN/FILTER...

Gravel filter (flow direction of filtering)

Shutoff valve recycled water

to the recycled water tank

During backwash, the water flows via

Immersion pump

multi-channel valve in position RÜCK-
SPÜLEN/BACKWASH...

Gravel filter (against flow direction of fil-
tering)

Restrictor

To the sludge collector

In order to prevent sand from being forced
out, the volume flow is restricted by a throt-
tle during the backflow phase.
Caution
Risk of damage. An increased backflow
speed rinses the filling inside the filter. The
backflow speed was set up by a specialist
during the machine startup and must not be
modified.

During final rinse the water flows via

Immersion pump

multi-channel valve in position
NACHSLPÜLEN/RINSE...

Gravel filter (flow direction of filtering)

To the sludge collector

Purpose of circulation:

Additional movement of the recycled
water, especially when the washing
system has come to a standstill, to
avoid formation of brackish water and
reducing the odour problem.

Additional supply of air to the water to
avoid odour problem

The water flows from the recycled water
tank to the sludge removal as follows:

Recycled water tank

Circulation valve

Circulation pump

Sludge removal

Flow chart (drainage connection on recycled water tank)

Functional description

Filter operations

Backwash

Final rinse

Processed water circulation

17

EN

Advertising
This manual is related to the following products: