ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 117)

111 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
8 Click Next. The following window is displayed:
9 Select The updated driver... and click Next. If the following window is not displayed, verify that the SBG1000
Installation CD-ROM is properly inserted in the CD-ROM drive. If you still cannot find the correct driver file,
click Cancel to cancel the installation and perform the procedure for “
Removing the USB Driver from
Windows 98 or Windows Me ”. Then repeat this procedure.
10 After the window shown under step 9 is displayed, click Next.
If a window with the message Copying Files... displays and asks for the CD-ROM drive, type the CD-ROM
drive letter (for example, “D:”) and click OK.
If an Insert Disk window similar to the one below is displayed, Windows 98 system files are needed to
complete the installation. To install the files, insert your Windows 98 CD-ROM in the CD-ROM drive and
click OK.
Although your SBG1000 model number may be different than in the images in this guide, the
procedure is the same.