ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 119)

113 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Setting Up a USB Driver in Windows 2000
1 Insert the SBG1000 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must
be inserted and read by the PC before you connect the SBG1000 to the PC.
2 Connect the USB cable as shown in USB Connection .
A few seconds after you complete the USB connection, the Found New Hardware window is displayed:
3 Click Next. The following window is displayed:
Be sure “Search for a suitable driver for my device” is selected.
Although your SBG1000 model number may be different than in the images in this guide, the
procedure is the same.